User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
149
Destination IP Mask
Setting
Description
Factory Default
Select the port(s) from
the drop-down list
Select the destination IP mask from the list. None
DSCP
Setting
Description
Factory Default
0 to 63
Specify the DSCP value.
Any
When finished, click CREATE to complete.
Note that the following system packets are not included in the ACL operation.
Item
Destination/Source Port Number
DHCP Server
67
DHCP Client
68
Moxa Service
40404
MAC-based ACL Table Configurations
Configure the following settings for MAC-based access list.
Active Interface Type
Setting
Description
Factory Default
Port-based
Specify Port-based as the active interface type.
None
VLAN-based
Specify VLAN-based as the active interface type.
Active Ingress Ports (For Port-based type)
Setting
Description
Factory Default
Select the port(s) from
the drop-down list
Select the port(s) as the active ingress port(s). None
Active Ingress VLAN (For VLAN-based type)
Setting
Description
Factory Default
Select the port(s) from
the drop-down list
Select the port(s) as the active ingress VLAN. None
When finished, click APPLY to save your changes.