User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
165
Event Notification
There are two functions within Event Notification: System and Function, and Port.
In the Event Notification menu, click the System and Function tab, and then click the edit icon on the
specific event you want to configure. For example, select the edit icon for warm start when the switch
reboots.
Configure the following settings.
Enable
Setting
Description
Factory Default
Enabled
Enable Event Notification for this event.
Enabled
Disabled
Disable Event Notification for this event.
Registered Action
Setting
Description
Factory Default
Trap
Send SNMP Trap for event notifications.
Trap/Email
Email
Send an email for event notifications.
MGMT Relay
Trigger MGMT Relay for event notifications.
PWR1 Relay
Trigger PWR1 Relay for event notifications.
PWR2 Relay
Trigger PWR2 Relay for event notifications.
When finished, click APPLY to save your changes.
In addition, use the same method to edit other events, such as login lockout, warm start, password
changed, etc.