User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
167
When finished, click APPLY to save your changes.
In addition, use the same method to edit other events such as, port status is off, port shutdown by port
security, and port recovery by rate limit, etc.
Check the following table for the severity degree of each event.
System & Function
Event Name
Severity
Cold start
Critical
Warm start
Notice
Configuration changed
Notice
Login success
Notice
Login fail
Warning
Login lockout
Warning
Account setting changed
Notice
Configuration imported
Notice
SSL certification changed
Notice
Log capacity threshold
Warning
Password changed
Notice
PWR Off->On
Notice
PWR On->Off
Notice
DI On
Notice
DI Off
Notice
Topology changed
Warning
Coupling changed
Warning
Master changed
Warning
Master mismatch
Warning
RSTP topology changed
Warning
RSTP root changed
Warning
RSTP migration
Warning
RSTP invalid BPDU
Warning
RSTP new port role
Warning
Redundant port health check fail
Error
Dual homing path changed
Warning
Dot1X auth fail
Warning
LLDP table changed
Information
RMON raising alarm
Warning
RMON failing alarm
Warning
PD power On
Notice
PD power Off
Notice
Low input voltage
Warning
PD over current
Error
PD no response
Error
Over power budget limit
Warning
Power detection failure
Warning
Port
Event Name
Severity
Port On
Notice
Port Off
Notice
Port shutdown by Port Security
Warning
Port shutdown by Rate Limit
Warning
Port recovery by Rate Limit
Warning
Relay Output Overview
A relay is an electrically operated switch that often uses an electromagnet to mechanically operate a switch.
Relays are used to control a circuit by a separate low-power signal, or where several circuits must be
controlled by one signal. This is typically safe when the problem or malfunction occurs in a remote device.