User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
179
Enable
Setting
Description
Factory Default
Enabled
Enable Port Mirror for this session.
Disabled
Disabled
Disable Port Mirror for this session.
Tx Source Port
Setting
Description
Factory Default
Select the port from the
list
Select this option to monitor only those data packets being
sent out through the switch’s port.
None
Rx Source Port
Setting
Description
Factory Default
Select the port from the
list
Select this option to monitor only those data packets coming
into the switch’s port.
None
Destination Port
Setting
Description
Factory Default
Select the port from the
list
Specify this port as the destination port. None
When finished, click APPLY to save your changes.
NOTE
The RSTP ports and Port Mirror destination port cannot be enabled on the same port.
The Port Mirror status can be seen in the figure below.
Ping
The Ping function uses the ping command to give users a simple but powerful tool for troubleshooting
network problems. The function most unique feature of the function is that even though the ping command
is entered from the user’s PC, the actual ping command originates from the Moxa switch itself. This allows
the user to essentially sit on top of the Moxa switch and send ping commands out through its ports.
To use the Ping function, click Ping on the menu, and enter the IP address or domain name you want to
ping. After clicking Ping, the result will be shown.