User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
188
To switch to Advanced Mode, click the change mode icon on the upper right corner of the page, and then
select Change Mode.
Click CHANGE to change to Advanced Mode.
Advanced Mode offers more detailed system configurations for specific functions. Use the same process if
you want to return to Standard Mode.
Disable Auto Save
Auto Save allows users to save the settings to the start-up configurations; all parameters will be effective
when applied immediately, even when the switch has restarted. When users select Disable Auto Save, all
parameters will be temporarily stored in the running config (memory), and a disk icon will appear on the
upper right corner of the page. Users need to save the running-configuration to the startup-configuration
when changing any parameters or function after clicking Apply.
It is highly recommended that you always manually save all configurations by clicking Save Disk icon when
Disable Auto Save is applied, or all information will have disappeared after the switch has restarted.
When Disable Auto Save is applied, only the configurations that are running will be saved; users can
unplug the power or perform a warm start to recover the network before manually saving the
configurations. When Auto Save is enabled, the start-up configurations will be saved in the switch.