User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
46
MAC Address
Setting
Description
Factory Default
Input the
assigned MAC
address
Specify the MAC address of the device you want to assign an
IP address to. Make sure the MAC address is entered in the
correct format. Here is an example:
28-d2-44-D3-e3-f2 or 28:d2:44:D3:e3:f2.
None
Default Gateway
Setting
Description
Factory Default
Input the IP address of
the default gateway
Specify the default gateway for the client to use. None
Lease Time (sec.)
Setting
Description
Factory Default
Input the lease time for
the DHCP, from 10 to
604800.
Define how long before the IP address needs to be reassigned.
86400
DNS Server 1
Setting
Description
Factory Default
Input the IP address of
the 1st DNS server
Specify the IP address of the 1st DNS server for the client to
use.
None
DNS Server 2
Setting
Description
Factory Default
Input the IP address of
the 2nd DNS server
Specify the IP address of the 2nd DNS server for the client to
use.
None
NTP Server
Setting
Description
Factory Default
Input the address of
the NTP server
Specify the NTP server the client will use. None
When finished, click CREATE.
Port-based IP Assignment
Users can assign an IP to a device based on what switch port it is connected to. This can be useful if you
want to always use the same IP for a device connected to a specific port, even if it is replaced with a
different device.
On the General tab, select Port-based IP Assignment. Click APPLY.