User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
49
Time
This section describes how to configure the Time Zone and System Time settings for the switch. The
switch has a time calibration function based on information from an NTP server or a user-specified time and
date, allowing functions such as automatic warning emails to include a time and date stamp.
NOTE
The user must update the Current Time and Current Date after the switch has been powered off for an
extended period of time (e.g., three days). The user must pay particular attention to this when there is no
NTP server or Internet connection available.
Time Zone
Users can configure the time zone for the switch.
System Uptime
Setting
Description
Factory Default
System-specified time
This indicates how long the switch has been running since the
last cold start.
N/A
Current Time
Setting
Description
Factory Default
User-specified time
Shows the current system time.
None