User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
52
Time
Setting
Description
Factory Default
Input the current time
Specify the current time. You can manually input the time, or
you can click Sync From Browser to set the time based on the
time used by your web browser.
None
Clock Source is from SNTP
Time Server 1
Setting
Description
Factory Default
Input the address of
the 1st SNTP time
server
Specify the IP or domain address of the 1st SNTP server to
use (e.g., 192.168.1.1, time.stdtime.gov.tw, or
time.nist.gov).
Time.nist.gov
Time Server 2
Setting
Description
Factory Default
Input the address of
the 2nd SNTP time
server
Specify the IP or domain address of the secondary SNTP
server to use if the first SNTP server fails to connect.
None
Click APPLY to complete.
Clock Source is from NTP
If the switch is connecting to an NTP server that requires authentication, refer to the NTP Authentication
section to configure the NTP key to use.
Time Server 1
Setting
Description
Factory Default
Input the address of
the 1st NTP time server
Specify the IP or domain address of the 1st NTP server to use
(e.g., 192.168.1.1, time.stdtime.gov.tw, or time.nist.gov).
Time.nist.gov
Authentication
Setting
Description
Factory Default
Disabled
Enable or disable NTP authentication for Time Server 1.
Disabled
Time Server 2
Setting
Description
Factory Default
Input the address of
the 2nd time server
Specify the IP or domain address of the secondary NTP server
to use if the first NTP server fails to connect.
None
Authentication
Setting
Description
Factory Default
Disabled
Enable or disable NTP Authentication for Time Server 2.
Disabled
Click APPLY to complete.
NTP Server
Click the NTP Server Tab to perform further configuration.