User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
53
Enable
Setting
Description
Factory Default
Enabled
Enable the NTP server.
Disabled
Disabled
Disable the NTP server.
Client Authentication
Setting
Description
Factory Default
Enabled
Enable NTP authentication.
Disabled
Disabled
Disable NTP authentication.
When finished, click APPLY to save your changes.
NOTE
The NTP server will use TCP port 123 to send messages to the NTP client.
NTP Authentication
This section describes how to configure NTP Authentication. Click the NTP Authentication tab, and then
click the + icon on the page.
Configure the following settings.
Key ID
Setting
Description
Factory Default
Input the Key ID from
1 to 10
Input the Key ID to use for NTP authentication. None