User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
58
To configure linkup delay for a port, click the edit icon on the port you want to configure.
Some parameters need to be configured.
Linkup Delay
Setting
Description
Factory Default
Enable
Enables linkup delay for the port.
Disabled
Disable
Disables linkup delay for the port.
Delay Time (sec.)
Setting
Description
Factory Default
1 to 1000
Specify the linkup delay time from 1 to 1000 seconds.
2
Copy Config to Ports
Setting
Description
Factory Default
Select the port(s) from
the drop-down list
Allows you to copy the configurations to other port(s). None
When finished, click APPLY to save your changes.
Link Aggregation
Link Aggregation (Port Channel) Overview
Link Aggregation helps balance, optimize, and facilitate the switch’s throughput. This method can combine
multiple network communications in parallel to maximize data throughput, increasing data communication
efficiency for each port. In addition, it also acts as a useful method for network redundancy when a link
fails. In general, Link Aggregation supports combining multiple physical switch ports into a single, efficient
bandwidth data communication route. This can improve network load sharing and increase network
reliability.