User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
61
When finished, click APPLY to save your changes.
Deleting the Port for Link Aggregation
To delete the port for Link Aggregation, check the port and then click the delete icon.
Click DELETE to finish. Note that some features, such as RSTP and VLAN will be set to default values once
you delete the Link Aggregation setting.
When using SFP ports to perform Link Aggregation on the EDS-4014 Series and EDS-G4014 Series, we
suggest using the top four ports, as opposed to the two located at the bottom of the device.
PoE
PoE Overview
Power over Ethernet (PoE) has become increasingly popular, due in large part to the reliability provided by
PoE Ethernet switches that supply the power to Powered Devices (PD) when AC power is not available or is
too expensive to provide locally.
Power over Ethernet can be used with the following types of devices:
• Surveillance cameras
• Security I/O sensors
• Industrial wireless access points
• Emergency IP phones
Recently, more data, video, voice, service, and control packets are converging on one network. Moxa’s PoE
switches are equipped with many advanced PoE management functions, providing critical security systems
with a convenient and reliable Ethernet network. Moreover, Moxa’s advanced PoE switches support the high
power PoE+ standard, PD failure check, legacy PD detection, and auto power cutting.