User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
62
PoE Port Settings
Click PoE on the menu, and then select the General tab on the configuration page.
NOTE
Please do not switch Power Management mode, i.e. Allocated Power and Consumed Power, when the
device is in operation.
Configure the following settings.
NOTE
Please enable Auto Power Cutting to optimize power usage.
Power Output
Setting
Description
Factory Default
Enable
Enable PoE for all ports on the switch.
Enabled
Disable
Disable PoE for all ports on the switch.
Power Management mode
Setting
Description
Factory Default
Allocated Power
Calculate power budget of all ports and ensure the allocated
power is under the power budget limit.
Consumed Power
Consumed Power
Calculate real-time power consumption of all ports.
Auto Power Cutting
Setting
Description
Factory Default
Enable
If the total power consumption exceeds the system power
budget threshold, low priority for power output of the port will
perform auto power cutting.
Disabled
Disable
Disable the system power budget criteria design.
System Power Budget (watt)
Setting
Description
Factory Default
Input the value from 30
to 240
Input a value for the system power budget. 240