User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
66
Configure the following parameters.
Enable
Setting
Description
Factory Default
Enable
Enable PD failure check for this port.
Disabled
Disable
Disable PD failure check for this port.
Device IP
Setting
Description
Factory Default
Input the device’s IP
Specify the PD’s IP address.
0.0.0.0
Check Frequency (sec.)
Setting
Description
Factory Default
5 to 300
Specify how often the PD failure check will run.
10
No Response Times
Setting
Description
Factory Default
1 to 10
The maximum number of IP checking cycles.
3
Action
Setting
Description
Factory Default
No Action
No action will run.
No Action
Restart PD
Restart the PoE device when settings are triggered.
Shutdown PD
Shut down the PoE device when settings are triggered.
Copy Config to Ports
Setting
Description
Factory Default
Select the port(s) from
the drop-down list
Copy the configurations to other port(s). None
When finished, click APPLY to save your changes.