User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
79
Join Time (sec.)
Setting
Description
Factory Default
10 to 499999980
Input the join time from 10 to 499999980 seconds.
200
Leave Time (sec.)
Setting
Description
Factory Default
30 to 499999980
Input the leave time from 30 to 499999980 seconds.
600
Leave All time (sec.)
Setting
Description
Factory Default
30 to 499999990
Input the leave all time.
10000
Copy Config to Ports
Setting
Description
Factory Default
Select the port(s) from
the drop-down list
Copy the configurations to other port(s). None
When finished, click APPLY to save your changes.
MAC
This section explains Independent VLAN learning and describes how to configure Static Unicast and the
MAC Address Table.
Independent VLAN Learning
Moxa’s switch uses the Independent VLAN Learning (IVL) mode.
In an IVL Mode, a MAC table will be created in each VLAN, which will constitute many MAC tables.
However, the same VID record will be selected and put in a table. A MAC table will be stored in the format
of MAC + VID, the same MAC will be stored in different tables with different VIDs.
Static Unicast
Click Static Unicast on the function menu page and click the + icon on the configuration page.