User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
86
Untag Default Priority
Setting
Description
Factory Default
0 to 7
802.1p tag (CoS) can be range from 0 (lowest) to 7 (highest).
3
Copy Config to Ports
Setting
Description
Factory Default
Select from the drop-
down list
Copy the settings to other ports you select. None
When finished, click APPLY to save your changes.
Ingress Rate Limit
Exceed Rate Limit Threshold Port Shutdown
In general, any user shall not consume unlimited bandwidth and influence others' access. One particular
scenario is that a malfunctioning switch or mis-configured network might cause "broadcast storms". Moxa
industrial Ethernet switches not only prevent broadcast storms, but can also regulate ingress packet rates,
giving administrators full control of their limited bandwidth to prevent undesirable effects caused by
unpredictable faults.
Editing Port Shutdown
To edit the port shutdown configurations, click the Port Shutdown tab.
Configure the following settings.
Enable
Setting
Description
Factory Default
Enable
Enable the port to be shut down.
Disabled
Disable
Disable the ability for the port to be shut down.
Release Interval (min.)
Setting
Description
Factory Default
0 to 10080
Specify the release interval for the port to shut down. 0
means this port will be shut down until manually enabled.
60
When finished, click APPLY to save your changes.