Datasheet

ManualsBrandsMoxa ManualsAutomationInterface Gateway, MODBUS/EtherNet / IP/MODBUS TCP - PROFINET, Ports 4

www.moxa.com

MGate 5103 Series

1-port Modbus RTU/ASCII/TCP/EtherNet/IP-to-PROFINET gateways

Features and Benefits

• Converts Modbus, or EtherNet/IP to PROFINET

• Supports PROFINET IO device

• Supports Modbus RTU/ASCII/TCP master/client and slave/server

• Supports EtherNet/IP Adapter

• Effortless configuration via web-based wizard

• Built-in Ethernet cascading for easy wiring

• Embedded traffic monitoring/diagnostic information for easy troubleshooting

• microSD card for configuration backup/duplication and event logs

• Status monitoring and fault protection for easy maintenance

• Serial port with 2 kV isolation protection

• -40 to 75°C wide operating temperature models available

• Supports redundant dual DC power inputs and 1 relay output

• Security features based on IEC 62443

Certifications

Introduction

The MGate 5103 is an industrial Ethernet gateway for converting Modbus RTU/ASCII/TCP or EtherNet/IP to PROFINET-based network

communications. To integrate existing Modbus devices onto a PROFINET network, use the MGate 5103 as a Modbus master/slave or EtherNet/IP

adapter to collect data and exchange data with PROFINET devices. The latest exchange data will be stored in the gateway. The gateway will

convert stored Modbus or EtherNet/IP data into PROFINET packets so the PROFINET IO Controller can control or monitor field devices.

Easy Configuration via Web Console

The MGate 5103 Series comes with an illustrated Quick Setup guide designed to make configuration easy. With Quick Setup, you can easily access

protocol conversion modes and finish the configuration in a few steps. The MGate 5103 Series also supports a GSDML export function. GSDML

files can be imported into PROFINET PLCs to save time on PLC configuration.

Modbus RTU/ASCII/TCP Protocol Traffic Monitor

MGate 5103 gateways support Modbus RTU/ASCII/TCP Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage.

Communication issues could be caused by incorrect software parameters, such as slave IDs and register addresses, that were entered incorrectly,

or an incorrect command configuration. With Modbus RTU/ASCII/TCP Protocol Traffic Monitor, you can check the captured data and easily identify

the root cause.

Maintenance Functions

MGate 5103 gateways support a system log function that records events in the MGate; users can easily review log data remotely through the web

console. The gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PLC/DCS/SCADA

system when a Modbus device gets disconnected or does not respond, in which case the process PLC/DCS gets the status of each end device

and then issues alarms to notify operators.

Specifications

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector) 2

Auto MDI/MDI-X connection

Magnetic Isolation Protection 1.5 kV (built-in)

Summary of content (6 pages)

PAGE 1
MGate 5103 Series 1-port Modbus RTU/ASCII/TCP/EtherNet/IP-to-PROFINET gateways Features and Benefits • Converts Modbus, or EtherNet/IP to PROFINET • Supports PROFINET IO device • Supports Modbus RTU/ASCII/TCP master/client and slave/server • Supports EtherNet/IP Adapter • Effortless configuration via web-based wizard • Built-in Ethernet cascading for easy wiring • Embedded traffic monitoring/diagnostic information for easy troubleshooting • microSD card for configuration backup/duplication and event logs •
PAGE 2
Ethernet Software Features Industrial Protocols PROFINET IO Device, Modbus TCP Client (Master), Modbus TCP Server (Slave), EtherNet/IP Adapter Configuration Options Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console Management ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client MIB RFC1213, RFC1317 Time Management NTP Client Serial Interface Console Port RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1) No.
PAGE 3
Modbus TCP Mode Client (Master), Server (Slave) Client (Master), Server (Slave) Functions Supported 1, 2, 3, 4, 5, 6, 15, 16, 23 Max. No. of Client Connections 16 Max. No. of Server Connections 32 Max. No. of Commands 128 Input Data Size 512 bytes Output Data Size 512 bytes PROFINET Mode IO Device IO Device Max. No.
PAGE 4
Environmental Limits Operating Temperature MGate 5103: 0 to 60°C (32 to 140°F) MGate 5103-T: -40 to 75°C (-40 to 167°F) Storage Temperature (package included) -40 to 85°C (-40 to 185°F) Ambient Relative Humidity 5 to 95% (non-condensing) Standards and Certifications Safety EN 60950-1, UL 508 EMC EN 55032/24 EMI CISPR 32, FCC Part 15B Class B EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge
PAGE 5
Dimensions Ordering Information Model Name Operating Temp. MGate 5103 0 to 60°C MGate 5103-T -40 to 75°C Accessories (sold separately) Cables CBL-F9M9-150 DB9 female to DB9 male serial cable, 1.5 m CBL-F9M9-20 DB9 female to DB9 male serial cable, 20 cm CBL-RJ45F9-150 RJ45 to DB9 female serial cable, 1.5 m CBL-RJ45SF9-150 RJ45 to DB9 female serial shielded cable, 1.
PAGE 6
© Moxa Inc. All rights reserved. Updated Nov 10, 2019. This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information. 6 www.moxa.