MGate 5103 Quick Installation Guide Edition 1.2, March 2019 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778 Moxa China (Shanghai office): Toll-free: 800-820-5036 Tel: +86-21-5258-9955 Fax: +86-21-5258-5505 Moxa Europe: Tel: +49-89-3 70 03 99-0 Fax: +49-89-3 70 03 99-99 Moxa Asia-Pacific: Tel: +886-2-8919-1230 Fax: +886-2-8919-1231 Moxa India: Tel: +91-80-4172-9088 Fax: +91-80-4132-1045 2019 Moxa Inc.
Overview The MGate 5103 is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET network communications. Package Checklist Before installing the MGate 5103, verify that the package contains the following items: • 1 MGate 5103 gateway • 1 serial cable: CBL-RJ45F9-150 • Quick installation guide (printed) • Warranty card Please notify your sales representative if any of the above items is missing or damaged.
Hardware Introduction LED Indicators LED Ready Color Off Green Red MB/EIP Off Green (Blinking) Red (Blinking) PN Off Green (Blinking) Red (Blinking) Description Power is off or a fault condition exists Steady: Power is on, and the MGate is functioning normally Steady: Power is on, and the MGate is booting up Blinking slowly: Indicates an IP conflict, or the DHCP or BOOTP server is not responding properly Flashing quickly: the microSD card failed Modbus: No communication with Modbus device EtherNet/IP
Dimensions Unit: mm (inch) Reset Button Restore the MGate to factory default settings by using a pointed object (such as a straightened paper clip) to hold the reset button down until the Ready LED stops blinking (approximately five seconds). Pull-up, Pull-down, and Terminator for RS-485 Beneath the MGate 5103’s top cover, you will find DIP switches to adjust each serial port’s pull-up resistor, pull-down resistor, and terminator.
The following figure illustrates the two mounting options: Software Installation Information Please download the user's manual and Device Search Utility (DSU) from Moxa’s website: www.moxa.com Refer to the user’s manual for additional details on using the DSU. The MGate 5103 also supports login via a web browser. Default IP address: 192.168.127.
Power Input and Relay Output Pinouts V2+ Shielded Ground V2- DC DC Power Power Input 2 Input 2 V1+ N.O. Common N.C. V1- DC DC Power Power Input 1 Input 1 Specifications Power Requirements Power Input Power Consumption Operating Temperature 12 to 48 VDC 455 mA max. Standard models: 0 to 60°C (32 to 140°F) Wide temp. models: -40 to 75°C (-40 to 167°F) Ambient Relative Humidity 5 to 95% RH Dimensions 36 x 105 x 140 mm (1.42 x 4.13 x 5.
Terminal block (plug matched with socket): rated at 300 V, 15 A, 105°C, 12-28 AWG (0.0804 mm2 to 3.31 mm2) wire size, torque value 4.5 lb-in (0.509 N-m). The input terminal cable size: 14 AWG (2.1 mm2). ATTENTION For installations in hazardous locations (Class 1, Division 2): These devices are to be installed in an enclosure with a toolremovable cover or door, suitable for the environment. NOTE This equipment is suitable for use in Class 1, Division 2, Groups A, B, C, D or nonhazardous locations only.
