User Manual

- 5 -
Wall or Cabinet Mounting
Two metal plates are provided for mounting the
unit on a wall or inside a cabinet. Attach the
plates to the unit’s rear panel with screws. With
the plates attached, use screws to mount the
unit on a wall. The heads of the screws should be
5 to 7 mm in diameter, the shafts should be 3 to
4 mm in diameter, and the length of the screws
should be more than 10.5 mm.
For each screw, the head should be 6 mm or less in diameter, and the
shaft should be 3.5 mm or less in diameter.
The following figure illustrates the two mounting options:
Software Installation Information
Please download the user's manual and DSU (Device Search Utility) from
Moxa’s website: www.moxa.com
. Please refer to the User’s Manual for
additional details on using the Device Search Utility.
The MGate 5111 also supports login via a web browser.
Default IP address: 192.168.127.254
Default account: admin
Default password: moxa
Pin Assignments
Ethernet Port (RJ45)
Pin
Signal
1
Tx+
2
Tx-
3
Rx+
6
Rx-