User`s manual

NPort 5100 Series Web Console Configuration
5-27
ATTENTION
Consult your Network Administrator or ISP for the proper mail server settings. The Auto warning function may
not work properly if it is not configured correctly. NPort 5100 SMTP AUTH supports LOGIN, PLAIN, CRAM
-
MD5
(RFC 2554).
SNMP Trap Server
SNMP trap server IP or domain name
Setting Factory Default Necessity
IP address or Domain
Name
None Optional
Event Type
Cold start
This refers to starting the system from power off (contrast this with warm start). When performing a cold start,
NPort 5100 will automatically issue an Auto warning message by e-mail, or send an SNMP trap after booting up.
Warm start
This refers to restarting the computer without turning the power off. When performing a warm start, NPort
5100 will automatically send an e-mail, or send an SNMP trap after rebooting.
Authentication failure
The user inputs a wrong password from the Console or Administrator. When authentication failure occurs, the
NPort will immediately send an e-mail or send an SNMP trap.
IP address changed
The user has changed NPort 5100’s IP address. When the IP address changes, NPort 5100 will send an e-mail
with the new IP address before NPort 5100 reboots. If the NPort 5100 is unable to send an e-mail message to
the mail server within 15 seconds, NPort 5100 will reboot anyway, and abort the e-mail auto warning.
Password changed
The user has changed NPort 5100’s password. When the password changes, NPort 5100 will send an e-mail
with the password changed notice before NPort 5100 reboots. If the NPort 5100 is unable to send an e-mail
message to the mail server within 15 seconds, NPort 5100 will reboot anyway, and abort the e-mail auto
warning.