NPort 5100A Series Quick Installation Guide Version 3.3, December 2019 Technical Support Contact Information www.moxa.
Overview NPort 5100A series device servers are compact, palm-sized data communication devices that allow you to control RS-232 (NPort 5110A), RS-422/485 (NPort 5130A), and RS-232/422/485 (NPort 5150A) serial devices over a TCP/IP-based Ethernet. NOTE “-T” indicates an extended temperature model.
NOTE The NPort 5110A, NPort 5130A, and NPort 5150A have the same form factor. Reset Button—Press and hold the Reset button for 5 seconds to load factory defaults: Use a pointed object, such as a straightened paper clip or toothpick, to depress the reset button. This will cause the Ready LED to blink on and off. The factory defaults will be loaded once the Ready LED stops blinking (after about 5 seconds). At this point, release the reset button.
Hardware Installation Information STEP 1: After removing the NPort 5100A series device server from the box, connect the NPort 5100A series device server to a network. Use a standard straight-through Ethernet cable to connect to a hub or switch. When setting up or testing the NPort 5100A series device server, you might find it convenient to connect directly to your computer’s Ethernet port. In this case, use a cross-over Ethernet cable.
NOTE For the NPort with DB Male serial ports, you may refer to DB9 Male Ports pin assignment section to loop back pin 2 and pin 3 for the RS-232 interface to carry out a self test on the device. Pin Assignments Ethernet Port Pinouts Pin No. 1 2 3 6 Ethernet Tx+ TxRx+ Rx- NPort 5110A—DB9 male (RS-232) port pinouts Pin No. 1 2 3 4 5 6 7 8 9 RS-232 DCD RxD TxD DTR GND DSR RTS CTS – NPort 5130A—DB9 male (RS-422/485) port pinouts Pin No.
Specifications Power Requirements Power Input Power Consumption Environmental Limits Operating Temperature Ambient Humidity Dimensions With ears Without ears Protection Serial Line Protection Magnetic Isolation Power Line Protection 12 to 48 VDC NPort 5110A: 82.5 mA @ 12V, 47.3 mA @ 24V NPort 5130A: 89.1 mA @ 12V, 49.5 mA @ 24V NPort 5150A: 92.4 mA @ 12V, 52.8 mA @ 24V Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) 5 to 95% RH 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.