User manual

NPort 5000AI-M12 Series Web Console Configuration
5-3
4. The NPort 5000AI-M12 homepage will open next. There are two buttons on this page: Quick setup and
Export/Import. You can click Overview at any time to go back to this page. The following sections
introduce these two convenient functions and all the other specific settings in the Main Menu on the left.
ATTENTION
If you can’t remember the password,
the ONLY way to configure the NPort 5000AI-M12 is to load factory
defaults
by using the “Reset to default” button located at the top side of NPort 5000AI-M12.
Remember to
export the configuration file when you have finished the configuration. After using the “
Reset to
default
” button to load factory defaults, your configuration can be easily reloaded into the NPort 5000AI-
M12
with the
Import function.
ATTENTION
If your NPort
5000AI-M12 application requires using password protection, you must enable the cookie
function in your browser. If the cookie function is disabled, you will not be allowed to enter the Web Console
Screen.
Quick Setup
Quick Setup streamlines configuration of your NPort into three basic and quick steps that covers the most
commonly-used settings. At any time while in Quick Setup you may click the Back button to return to the
previous step, or the Cancel button to reverse all settings. For more detailed settings, please refer to the
“Basic Settings,” “Network Settings,” “Serial Settings,” and “Operating Settings,” sections later in this chapter.