User manual

NPort 5000AI-M12 Series Web Console Configuration
5-21
1 to 65535 966 Optional
The Command port is a listen TCP port for IP-Serial Lib commands from the host. In order to prevent a TCP
port conflict with other applications, the user can set the Command port to another port if needed. IP-Serial Lib
will automatically check the Command Port on NPort 5000AI-M12 so that the user does not need to configure
the program.
TCP Client Mode
TCP alive check time
Setting Factory Default Necessity
0 to 99 min 7 min Optional
0 min: The TCP connection will not be closed due to an idle TCP connection.
1 to 99 min: The NPort 5000AI-M12 automatically closes the TCP connection if there is no TCP activity for the
given time.
Inactivity time
Setting Factory Default Necessity
0 to 65535 ms 0 ms Optional
0 ms: The TCP connection will not be closed due to an idle serial line.