User manual

NPort 5000AI-M12 Series Configuring NPort Administrator
6-32
3. On COM Grouping page, you can specify one serial port whose signals will be taken into account by the
COM Group and change the Read/Write status for each serial port.
IP Address Report
When the NPort 5000AI-M12 is used in a dynamic IP environment, users must spend more time with IP
management tasks. NPort 5000AI-M12 Series products help out by periodically reporting their IP address to
the IP location server, in case the dynamic IP has changed.
1. Configure the NPort 5000AI-M12 with Dynamic IP settings (DHCP, BOOTP, or DHCP/BOOTP). Assign the
remote Auto IP report server’s IP address and UDP port.