NPort 6150/6250 Series Quick Installation Guide Edition 10.0, November 2017 Technical Support Contact Information www.moxa.
Overview The NPort 6150/6250 series secure serial device servers provide reliable serial-to-Ethernet connectivity for a wide range of serial devices. The NPort 6150/6250 support TCP Server, TCP Client, UDP, and Pair-Connection operation modes to ensure the compatibility of network software.
NPort 6250 Reset Button—Press the Reset Button continuously for 5 sec to load factory defaults. Use a pointed object, such as a straightened paper clip or toothpick, to press the reset button. This will cause the Ready LED to blink on and off. The factory defaults will be loaded once the Ready LED stops blinking (after about 5 seconds). At this point, you should release the reset button.
LED Name Link P1, P2 LED Color Orange Green Off Orange Green Off P1, P2 in-use LED Green Off LED Function 10 Mbps Ethernet connection 100 Mbps Ethernet connection Ethernet cable is disconnected, or has a short. Serial port is receiving data. Serial port is transmitting data. No data is being transmitted or received through the serial port. Serial port was opened by server side software. Serial port has not been opened by server side software.
Software Installation Information The Documentation and software CD contains the user’s manual, NPort Search Utility, and the PComm Lite Suite. Insert the CD into your computer’s CD-ROM drive and follow the on-screen instructions. Please refer to the user’s manual for additional details on using the NPort Search Utility and PComm Lite.
