User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Initial IP Address Configuration
- 4. Web Console Configuration
- 5. System Management Settings
- 6. Introduction and Configuring VPN
- 7. Configuring OnCell Central Management Software
- 8. OnCell Search Utility
- A. Default Settings
- B. Dynamic Domain Name Server
- C. Auto IP Report Protocol
OnCell 5000 Series System Management Settings
5-11
System Log
This option displays the system log. You may click Select all to select the entire log if you wish to copy and
paste the contents into a text file.
Dout State
Dout State refers to the relay output status, which can be configured to change upon the occurrence of certain
system events through Auto Warning Settings under System Management. Click Dout State under
System Monitoring to display a list of events that may cause a change to the Dout state. If a configured alarm
event occurs, the Dout state changes, and you can refer to this screen to determine the specific cause for the
alarm. To reset the Dout state, click on Acknowledge Event.
Din and Power Status
Go to Din and Power status under System Monitoring to display the power and digital input information.