User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Initial IP Address Configuration
- 4. Web Console Configuration
- 5. System Management Settings
- 6. Introduction and Configuring VPN
- 7. Configuring OnCell Central Management Software
- 8. OnCell Search Utility
- A. Default Settings
- B. Dynamic Domain Name Server
- C. Auto IP Report Protocol
OnCell 5000 Series Configuring OnCell Central Management Software
7-11
Service Forwarding
From the left navigation panel, click Network Settings Æ OnCell Central Settings Æ Service Forwarding
to configure the OnCell Central Settings. The configuration items are shown below:
Service forwarding (default=Disable): If enabled, this option will establish the Ethernet device connection
of the OnCell device to OnCell Central Server. Up to 8 Ethernet devices can be stored in the Service Forwarding
Table.
Service forwarding port: Ports used to establish the Ethernet port connection of the OnCell device to OnCell
Central Server.
Step 3: Host Settings and Management
Before you connect to OnCell Central’s Web, you must install Adobe Flash, which you can download from Adobe
Flash Web Site: http://get.adobe.com/flashplayer/
If you are using Microsoft Windows 2000 Server, Microsoft Windows 2008 Server, or Microsoft Windows Server
2003 platform, you may need to enable your ActiveX control on your platform. For other platform versions,
refer directly to the Host Settings.
1. Start Internet Explorer and click on Tool Æ Internet Options.