User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Initial IP Address Configuration
- 4. Introducing Serial Port Operation Modes
- 5. Introducing OnCell Central and Ethernet Operation Modes
- 6. Using the Web Console
- 7. Cellular Network Settings
- 8. Configuring Serial Port Operation Modes
- 9. Configuring the Cellular-Enabling Ethernet Device
- 10. Configuring OnCell Central Management Software
- 11. Additional Serial Port Settings
- 12. System Management Settings
- 13. Software Installation/Configuration
- A. Pinouts and Cable Wiring
- B. RFC2217
- C. Dynamic Domain Name Server
- D. Well Known Port Numbers
- E. Auto IP Report Protocol
- F. GSM Alphabet
- G. Default Settings
OnCell G3111/G3151/G3211/G3251 Series User’s Manual Configuring OnCell Central Software
10-21
OnCell Central Web Console
1. Start the web browser.
2. In the Address input box, enter the OnCell Central’s web IP address follow with the 8080 port
(ex: 192.168.127.111:8080). Now you are able to see the OnCell Central Manager Welcome
page.
3. Enter the default username and password and then click Login.
Username: admin
Password: admin
4. The OnCell Central page opens:
From this page, you are able to change your view
Server
Device
Logout