User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Initial IP Address Configuration
- 4. Introducing Serial Port Operation Modes
- 5. Introducing OnCell Central and Ethernet Operation Modes
- 6. Using the Web Console
- 7. Cellular Network Settings
- 8. Configuring Serial Port Operation Modes
- 9. Configuring the Cellular-Enabling Ethernet Device
- 10. Configuring OnCell Central Management Software
- 11. Additional Serial Port Settings
- 12. System Management Settings
- 13. Software Installation/Configuration
- A. Pinouts and Cable Wiring
- B. RFC2217
- C. Dynamic Domain Name Server
- D. Well Known Port Numbers
- E. Auto IP Report Protocol
- F. GSM Alphabet
- G. Default Settings

OnCell G3111/G3151/G3211/G3251 Series User’s Manual Configuring OnCell Central Software
10-24
Item Description
Device MAC
Each Device has unique MAC ID that you can find on the
device lable or web/telnet/serial console
Device Name Device’s Name
WAN IP Device’s WAN IP address
Ethernet IP Device’s LAN IP address
OP mode Device’s operation mode
Serial No.
Each Device has unique serial no. that you can find on the
device lable or web/telnet/serial console
FW Version Device’s firmware version
Last Connected Device’s last connection date, month, time
Refresh: The devices list is refreshed when this button is pressed. New online devices will be
shown at the top of list.
Auto Refresh (30 secs): If you checkmark this box, the new online device list will be updated
every 30 seconds.
Group Edit. When you create groups of devices, you can efficiently apply device settings or
perform maintenance tasks on multiple devices at the same time. To create a group, click the right
mouse button and select Group Edit.