User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Initial IP Address Configuration
- 4. Introducing Serial Port Operation Modes
- 5. Introducing OnCell Central and Ethernet Operation Modes
- 6. Using the Web Console
- 7. Cellular Network Settings
- 8. Configuring Serial Port Operation Modes
- 9. Configuring the Cellular-Enabling Ethernet Device
- 10. Configuring OnCell Central Management Software
- 11. Additional Serial Port Settings
- 12. System Management Settings
- 13. Software Installation/Configuration
- A. Pinouts and Cable Wiring
- B. RFC2217
- C. Dynamic Domain Name Server
- D. Well Known Port Numbers
- E. Auto IP Report Protocol
- F. GSM Alphabet
- G. Default Settings
OnCell G3111/G3151/G3211/G3251 Series User’s Manual Configuring OnCell Central Software
10-25
After creating the group, you can copy the devices under All Devices folder to create a new folder
(e.g., South A).
Remove Device. To maintain the list, you can remove all offline devices. To activate this function,
click the right mouse button and select Remove Device.
Note: If a device is removed from the All Devices Folder then the same device will be removed
from all other new folders, too.
All User Ports
This table describes All User Ports which host is established the connection to OnCell Central
Server, and corresponding to the OnCell device.