User`s manual

ManualsBrandsMoxa ManualsNetworkingONCELL G3111

141

142

143

144

145

146

147

148

149

150

Table Of Contents

1. Introduction
- Overview
- Package Checklist
- Product Features
- Product Specifications
2. Getting Started
- Panel Layout
  - OnCell G3111/G3151/G3211/G3251
- Connecting the Hardware
3. Initial IP Address Configuration
- Static and Dynamic IP Addresses
- Factory Default IP Address
- Configuration Options
4. Introducing Serial Port Operation Modes
- Overview
- Device Control Applications
- Socket Applications
- Ethernet Modem Mode
- SMS Tunnel Mode
- Disabled Mode
5. Introducing OnCell Central and Ethernet Operation Modes
- OnCell Central Management Software
- OnCell Central Serial Device Connection
- OnCell Central Ethernet Device Connection
- Cellular-Enabling Ethernet Device
6. Using the Web Console
- Using Your Web Browser
- Web Console Navigation
- Basic Settings
  - Server Settings
  - Time Settings
- Network Settings
- GuaranLink Settings (Pending)
7. Cellular Network Settings
- GSM GPRS Settings
8. Configuring Serial Port Operation Modes
- Port Setting Basics
- Device Control Applications
- Socket Applications
- Ethernet Modem Mode
- SMS Tunnel Mode
- Disabled Mode
9. Configuring the Cellular-Enabling Ethernet Device
- Host to OnCell via Cellular
10. Configuring OnCell Central Management Software
- Step 1: Server Settings
- Step 2: OnCell Device Web Console Settings
  - OnCell Central Settings
  - OnCell Central Server
- Step 3: Host Settings and Management
  - OnCell Central Web Console
- Server
- Device
- Logout
11. Additional Serial Port Settings
- Port Communication Parameters
- Serial Parameters
- Port Data Buffering/Log
- Port Chipher Settings
12. System Management Settings
- Misc. Network Settings
- Auto Warning Settings
- Maintenance
- Certificate
  - Ethernet SSL Certificate Import
  - Certificate/Key Delete
- System Monitoring
- System Status
  - Serial Data Log
  - System Log
- Network Status
- Save Configuration
- Restart
  - Restart System
  - Restart Ports
13. Software Installation/Configuration
- Overview
- OnCell Windows Driver Manager
  - Installing OnCell Windows Driver Manager
  - Using OnCell Windows Driver Manager
- OnCell Search Utility
  - Installing OnCell Search Utility
  - Configuring OnCell Search Utility
- Moxa OnCell Linux Real TTY Driver
- Moxa OnCell UNIX Fixed TTY Driver
  - Installing the UNIX Driver
  - Configuring the UNIX Driver
A. Pinouts and Cable Wiring
- Port Pinout Diagrams
  - RS-232 (male DB9) Pinouts
  - RS-232/422/485 (male DB9) Pinouts
- Cable Wiring Diagrams
  - Serial Cables
  - Pin Assignments for DB9 and DB25 Connectors
B. RFC2217
C. Dynamic Domain Name Server
- Overview
- Configuration
D. Well Known Port Numbers
E. Auto IP Report Protocol
F. GSM Alphabet
G. Default Settings

OnCell G3111/G3151/G3211/G3251 Series User’s Manual Software Installation/Configuration

13-8

If you select “WAN IP or Host name,” you must configure the 1st Data Port, 1st Command

Port, and Total Ports for the COM ports that will be mapped to. Click OK to proceed to the

next step. Note that the Add OnCell page supports FQDN (Fully Qualified Domain Name), in

which case the IP address will be filled in automatically.