User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Initial IP Address Configuration
- 4. Introducing Serial Port Operation Modes
- 5. Introducing OnCell Central and Ethernet Operation Modes
- 6. Using the Web Console
- 7. Cellular Network Settings
- 8. Configuring Serial Port Operation Modes
- 9. Configuring the Cellular-Enabling Ethernet Device
- 10. Configuring OnCell Central Management Software
- 11. Additional Serial Port Settings
- 12. System Management Settings
- 13. Software Installation/Configuration
- A. Pinouts and Cable Wiring
- B. RFC2217
- C. Dynamic Domain Name Server
- D. Well Known Port Numbers
- E. Auto IP Report Protocol
- F. GSM Alphabet
- G. Default Settings

OnCell G3111/G3151/G3211/G3251 Series User’s Manual Software Installation/Configuration
13-12
To re-configure the settings for a particular serial port on the OnCell
G3111/G3151/G3211/G3251, select the row corresponding to the desired port, and then click
the Setting icon.
7. On the Basic Setting page, use the COM Number drop-down list to select a COM number to
be assigned to the OnCell G3111/G3151/G3211/G3251’s serial port that is being configured.
Note that ports that are “in use” will be labeled accordingly.