User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Initial IP Address Configuration
- 4. Introducing Serial Port Operation Modes
- 5. Introducing OnCell Central and Ethernet Operation Modes
- 6. Using the Web Console
- 7. Cellular Network Settings
- 8. Configuring Serial Port Operation Modes
- 9. Configuring the Cellular-Enabling Ethernet Device
- 10. Configuring OnCell Central Management Software
- 11. Additional Serial Port Settings
- 12. System Management Settings
- 13. Software Installation/Configuration
- A. Pinouts and Cable Wiring
- B. RFC2217
- C. Dynamic Domain Name Server
- D. Well Known Port Numbers
- E. Auto IP Report Protocol
- F. GSM Alphabet
- G. Default Settings
OnCell G3111/G3151/G3211/G3251 Series User’s Manual Default Settings
G-2
TCP alive Check Time 7
Max connection 1
Ignore jammed IP Disable
Allow driver control Disable
Connection goes down RTS/DTR always high
Packet length 0
Delimiter process Do Nothing
Force transmit 0
Reverse Real COM Mode
TCP port 60950
Command port 63966
Designated Port 7010 to 7320
TCP alive Check Time 7
Max connection 1
Ignore jammed IP Disable
Allow driver control Disable
Connection goes down RTS/DTR always high
Packet length 0
Delimiter process Do Nothing
Force transmit 0
TCP Server Mode
TCP port 4001
Command port 966
TCP alive Check Time 7
Inactivity time 0
Ignore jammed IP Disable
Allow driver control Disable
Connection goes down RTS/DTR always high
Packet length 0
Delimiter process Do Nothing
Force transmit 0
TCP Client Mode
TCP port 4001
Designated Port 5010 to 5013
TCP alive Check Time 7
Inactivity time 0
Ignore jammed IP Disable
Connection control Stratup/None
Packet length 0
Delimiter process Do Nothing
Force transmit
0