User`s manual

RNAS-1200 Series Modify Network Settings
6-16
FTP/SSH
The RNAS-1200 comes with SSH and FTP disabled by default. This page will allow users to enable and disable
the FTP and SSH servers. If you would like to enable the FTP or SSH server, check the box next to the
appropriate entry and click Apply to complete.
WARNING
The SSH server does not come with any implemented security features. If you wish to enable the SSH server,
Moxa strongly re
commends a thorough and detailed reconfiguration of the SSH server’s security settings
before allowing the RNAS to go online.
The configuration file for the SSH server can be found at
/etc/ssh/sshd_config. The default login and
password for the SSH daemon are
root/root. Moxa strongly recommends forbidding root logins over
SSH.
Detailed information on how to audit and reconfigure SSH security is available in many places online. The three
links offered below are provided as suggestions, but because these are not Moxa-sponsored web pages no
guarantee is offered as to their availability or accuracy. However, these are well-established pages maintained
by the FOSS community and contain much useful advice. Users should their best judgment.
• The Official Debian Administration Blog
.
• The private key authentication official “How-to”: the unofficial Debian Wiki (maintained by Justin Hartman).
• The Official Debian Wiki entry on SSH:
The configuration files for the FTP server are located in /etc. For more information on configuring FTP, you may
refer to the official Debian Wiki (http://wiki.debian.org
) or the official Debian Administration Blog
(http://www.debian-administration.org).