Datasheet

ManualsBrandsMoxa ManualsAutomationSerial Converter, RS232 - RS422/RS485, Serial Ports 2

www.moxa.com

TCC-100/100I Series

Industrial RS-232 to RS-422/485 converters with optional 2 kV isolation

Features and Benefits

• RS-232 to RS-422 conversion with RTS/CTS support

• RS-232 to 2-wire or 4-wire RS-485 conversion

• 2 kV isolation protection (TCC-100I)

• Wall mounting and DIN-rail mounting

• Plug-in terminal block for easy RS-422/485 wiring

• LED indicators for power, Tx, Rx

• Wide-temperature model available for -40 to 85°C environments

Certifications

Introduction

The TCC-100/100I Series of RS-232 to RS-422/485 converters increases networking capability by extending the RS-232 transmission distance.

Both converters have a superior industrial-grade design that includes DIN-rail mounting, terminal block wiring, an external terminal block for power,

and optical isolation (TCC-100I and TCC-100I-T only). The TCC-100/100I Series converters are ideal solutions for converting RS-232 signals to RS-

422/485 in critical industrial environments.

Specifications

Serial Interface

Baudrate 50 bps to 921.6 kbps (supports non-standard baudrates)

Connector Terminal block

Isolation TCC-100I/100I-T: 2 kV (-I model)

No. of Ports 2

Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms

RS-485 Data Direction Control ADDC® (automatic data direction control)

Serial Standards RS-232, RS-422, RS-485

Terminator for RS-485 N/A, 120 ohms, 120 kilo-ohms

Serial Signals

RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422 Tx+, Tx-, Rx+, Rx-, GND

RS-485-4w Tx+, Tx-, Rx+, Rx-, GND

RS-485-2w Data+, Data-, GND

Summary of content (4 pages)

PAGE 1
TCC-100/100I Series Industrial RS-232 to RS-422/485 converters with optional 2 kV isolation Features and Benefits • RS-232 to RS-422 conversion with RTS/CTS support • RS-232 to 2-wire or 4-wire RS-485 conversion • 2 kV isolation protection (TCC-100I) • Wall mounting and DIN-rail mounting • Plug-in terminal block for easy RS-422/485 wiring • LED indicators for power, Tx, Rx • Wide-temperature model available for -40 to 85°C environments Certifications Introduction The TCC-100/100I Series of RS-232 to RS-4
PAGE 2
Power Parameters Input Current TCC-100/100-T: 50 to 85 mA @ 12 to 48 VDC TCC-100I/100I-T: 150 mA @ 12 to 48 VDC Input Voltage 12 to 48 VDC No. of Power Inputs 1 Overload Current Protection Supported Power Connector Terminal block (for DC models) Power Consumption TCC-100/100-T: 50 to 85 mA @ 12 to 48 VDC TCC-100I/100I-T: 150 mA @ 12 to 48 VDC Physical Characteristics Housing Metal Dimensions 67 x 100.4 x 22 mm (2.64 x 3.93 x 0.87 in) IP Rating IP30 Weight 148 g (0.
PAGE 3
Package Contents Device 1 x TCC-100/100I Series converter Installation Kit 1 x DIN-rail kit 1 x rubber stand Cable 1 x terminal block to power jack converter Documentation 1 x quick installation guide 1 x warranty card Dimensions Ordering Information Model Name Isolation Operating Temp. TCC-100 – -20 to 60°C TCC-100-T – -40 to 85°C TCC-100I ✓ -20 to 60°C TCC-100I-T ✓ -40 to 85°C Accessories (sold separately) DIN-Rail Mounting Kits DK35A DIN-rail mounting kit, 35 mm 3 www.moxa.
PAGE 4
Power Cords CBL-PJTB-10 Non-locking barrel plug to bare-wire cable © Moxa Inc. All rights reserved. Updated Apr 14, 2020. This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information. 4 www.moxa.