User`s manual

UC-7122/7124 User’s Manual Getting Started
Step 6: Type “4” for “Format Flash Disk and Reset OS” and then press Enter.
Step 7: After a few seconds, you will see the bootloader menu again. Unplug the power line and
then plug it back again. It takes about 3 minutes to reset the operating system.
Operating Your UC-7122/7124 Computer through the Serial
Console
The serial console port (located next to the two LAN ports) gives users a convenient way of
connecting the development workstation to the console utility of the target computer. This method
is particularly useful when using the computer for the first time.
After you have wired a serial cable, go back to the development workstation and start a terminal
program (e.g., HyperTerminal) by using the settings shown below for the serial console port.
Baudrate
115200 b
p
s
Parit
y
N
one
Data bits
8
Sto
p
bits
1
Flow Control
N
one
Terminal
ANSI
After a successful connection, type the login name and password as requested to log on to the
computer. The default values are both admin.
Login: admin
Password: admin
2-3