User`s manual

2
2
Chapter 2 Getting Started
In this chapter, we explain how to connect UC-7402, turn on the power, and then get started using
the programming and other functions.
The following topics are covered in this chapter:
 Powering on UC-7402
 Connecting UC-7402 to a PC
¾ Serial Console
¾ Telnet Console
¾ SSH Console
 Configuring the Ethernet Interface
¾ Modifying Network Settings with the Serial Console
¾ Modifying Network Settings over the Network
 Configuring the WLAN via the PCMCIA Interface
¾ IEEE802.11b
¾ IEEE802.11g
 Test Program—Developing Hello.c
¾ Installing the Tool Chain (Linux)
¾ Checking the Flash Memory Space
¾ Compiling Hello.c
¾ Uploading “Hello” to UC-7402 and Running the Program