User`s manual

UC-7408 User’s Manual Getting Started

2-4

ATTENTION

Serial Console Reminder

Remember to choose VT100 as the terminal type. Use cable CBL-RJ45F9-150, which comes

with UC-7408, to connect to the serial console port.

Telnet Reminder

When connecting to UC-7408 over a LAN, you must configure your PC’s Ethernet IP address to

be on the same subnet as the UC-7408 you wish to contact. If you do not get connected on the

first try, re-check the serial and IP settings, and then unplug and re-plug UC-7408’s power cord.

SSH Console

UC-7408 supports an SSH Console to offer users with better security options.

Windows Users

Click on the link http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html to download

PuTTY (free software) to set up an SSH console for UC-7408 in a Windows environment. The

following figure shows a simple example of the configuration that is required.

UC-7408