User`s manual

UC-7408 User’s Manual Managing Embedded Linux
3-4
local: UC7420-1.5.frm remote: UC7420-1.5.frm
200 Port command successful.
150 Opening data connection for UC7420-1.5.frm
226 Transfer complete.
13167772 bytes received in 2.17 secs (5925.8 kB/s)
ftp>
3. Next, use the upfirm command to upgrade the kernel and root file system:
#upfirm uc7408-x.x.x.frm
192.168.3.127 – PuTTY
root@Moxa:/mnt/ramdisk# upfirm UC7420-1.5.frm
Upgrade firmware utility version 1.0.
To check source firmware file context.
The source firmware file conext is OK.
This step will destroy all your firmware.
Do you want to continue it ? (Y/N) : Y
Now upgrade the file [redboot].
Format MTD device [/dev/mtd0] . . .
MTD device [/dev/mtd0] erase 128 Kibyte @ 60000 – 100% complete.
Wait to write file . . .
Compleleted 100%
Now upgrade the file [kernel].
Format MTD device [/dev/mtd1] . . .
MTD device [/dev/mtd1] erase 128 Kibyte @ 100000 – 100% complete.
Wait to write file . . .
Compleleted 100%
Now upgrade the file [mini-file-system].
Format MTD device [/dev/mtd2] . . .
MTD device [/dev/mtd2] erase 128 Kibyte @ 400000 – 100% complete.
Wait to write file . . .
Compleleted 100%
Now upgrade the file [user-file-system].
Format MTD device [/dev/mtd3] . . .
MTD device [/dev/mtd3] erase 128 Kibyte @ 1a00000 – 100% complete.
Wait to write file . . .
Compleleted 100%
Now upgrade the file [directory].
Format MTD device [/dev/mtd6] . . .
MTD device [/dev/mtd6] erase 128 Kibyte @ 20000 – 100% complete.
Wait to write file . . .
Compleleted 100%
Now upgrade the new configuration file.
Upgrade the firmware is OK.
Please press any key to reboot system.
ATTENTION
After you reboot your UC, DO NOT power off the UC until the Ready LED comes back ON.
Note that after upgrading the firmware, the first boot up will take as much as 2 to 3 minutes.