User's Manual

UC-8200 Series Hardware Hardware Introduction
2-8
Installation Options
DIN-rail Mounting
The aluminum DIN-rail attachment plate is already attached to the product’s casing. To mount the UC-8200 on
to a DIN rail, make sure that the stiff metal spring is facing upwards and follow these steps.
UC-8210 UC-8220
1. Pull down the bottom slider of the
DIN-rail bracket located at the
back of the unit
2. Insert the top of the DIN rail into
the slot just below the upper
hook of the DIN-rail bracket.
3. Latch the unit firmly on to the
DIN rail as shown in the
illustrations below.
4. Push the slider back into place.