User's Manual

UC-8200 Series Hardware Hardware Connection Description
3-4
Connecting to the Console Port
The console port is an RS-232 port located on the top panel, and can be connected to with a 4-pin pin header
cable. You can use this port for debugging or firmware upgrade.
Connecting the CAN Port
There is a CAN port in DB9 interface, located on the bottom panel. Refer to the figure on the left for detailed pin
definitions.
Connecting the Digital Inputs and Digital
Outputs
There are four digital inputs and four digital outputs on the top panel. Refer to the
figure on the left for detailed pin definitions.
Pin Signal
1 TxD
2 RxD
3 NC
4 GND
Pin Definition
1 –
2 CAN_L
3 CAN_GND
4 _
5 (CAN_SHLD
)
6 (GND)
7 CAN_H
8 _
9 (CAN_V+)