User's Manual

UC-8200 Series Hardware Hardware Connection Description
3-5
Inserting the SIM Card
The UC-8220 computer comes with a SIM card socket that allows users to install two SIM card for the cellular
communication.
Step 1
Remove the screw on the SIM card holder cover
located on the bottom panel of the UC-8220
computer.
Step 2
Insert the SIM card into the socket. Make sure you
insert in the right direction. To remove the SIM card,
press the SIM card in to release and then you can pull
out the SIM card.
Connecting the Antennas
There are two cellular antenna connectors (C1 and C2) on the
front panel of the UC-8200 Series. Also a GPS connector is for the
GPS module. All three connectors are of SMA type. Connect the
antennas on these connectors.
There are two Wi-Fi antenna connectors (W1 and W2) on the top
panel of the UC-8200 Series. Connect the antennas on the
connectors.