UPortTM 1100 Series Quick Installation Guide Version 7.0, July 2019 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778 Moxa China (Shanghai office): Toll-free: 800-820-5036 Tel: +86-21-5258-9955 Fax: +86-21-5258-5505 Moxa Europe: Tel: +49-89-3 70 03 99-0 Fax: +49-89-3 70 03 99-99 Moxa Asia-Pacific: Tel: +886-2-8919-1230 Fax: +886-2-8919-1231 Moxa India: Tel: +91-80-4172-9088 Fax: +91-80-4132-1045 2019 Moxa Inc.
Overview The UPort 1100 series is part of Moxa’s UPort Line of USB-to-Serial adaptors. The UPort product line provides a wide range of easy-to-use solutions for adding Windows COM ports and Linux tty ports through a PC’s USB port. The UPort 1100 series includes the following models: UPort 1110: UPort 1130: UPort 1130I: UPort 1150: UPort 1150I: 1-port RS-232 USB-to-Serial Converter. 1-port RS-422/485 USB-to-Serial Converter. 1-port RS-422/485 USB-to-Serial Converter w/ Isolation Protection.
supports, please go to support center on Moxa’s website to download the latest driver. 1. Run the Setup program, which you will find on Moxa’s support website http://www.moxa.com/support/, under the Product page. Click Next to start installing the driver. 2. Click on Next to install the driver in the indicated folder. 3. Click on Install to proceed with installation. 4. Then, click Finish to complete the driver installation.
Installing the Hardware 1. Case 1: The UPort Driver is Certified If the UPort driver that you installed has been certified by Microsoft, the UPort and the UPort’s serial ports will be installed automatically when you plug the UPort into your computer’s USB port. Case 2: The UPort Driver is NOT Certified If the UPort driver that you installed has not been certified by Microsoft, then plugging the driver into your computer’s USB port will activate the UPort installation program.
4. 5. The next window cautions you that this software has not passed Windows logo testing. This is a standard warning, and Moxa has thoroughly tested the driver for safe Windows operation. Please click Continue Anyways to proceed. Then, click Finish to complete the driver installation. Repeat Step2 to Step 4 until COM port is installed. Installing the Linux Driver for the UPort 1100 Series Linux Kernel 2.4.x Execute the following commands from the Linux prompt: # tar -xvfz driv_linux2.4_uport1p_vx.
After installing the driver, plug the UPort 1100 series device into the USB port of the WinCE Device. The driver will be loaded automatically. At this point, the UPort 1100 series is ready to use. Serial Port Pin Assignments The UPort 1100 series uses male DB9 connectors.
