UPort 2000 Series Quick Installation Guide USB-to-Serial Converter Version 3.0, July 2019 Technical Support Contact Information www.moxa.
Overview UPort is the brand name of Moxa’s USB-to-serial product line, which provides a wide range of products and solutions to extend Windows COM ports using the PC’s USB port. Important features of UPort products include support for Hi-Speed (480 Mbps) USB 2.0, Moxa CPU, Moxa UART, and the ability to assign COM port numbers. These features make Moxa’s UPort products easy to use and maintain.
Installing the UPort 2000 Series Windows Driver 1. Run the Setup program which you may find on Moxa’s support website http://www.moxa.com/support/, under the Product page. Click Next to start installing the driver. 2. Click Next to install the driver in the indicated folder.
3. Click Install to proceed with the installation. 4. Then click Finish to complete the driver installation. Installing the UPort 2000 Series Hardware WARNING 1. 2. 1. 2. 3. This unit is not meant to be sold to consumers. It will only be shipped to manufacturers or factories. This unit should be installed or set up by a qualified service technician. Connect the UPort to the PC using the USB cable. After powering on your PC, Windows will automatically detect the UPort.
4. Select Install the software automatically (Recommended).
5. The next window that opens cautions you that although this software has not passed Windows logo testing, this driver has already been tested and shown that it can support Windows OS. Click Continue Anyway to proceed. Then, click Finish to complete the driver installation. 6. Repeat steps 3 to 5 until all COM ports have been installed. Installing the Linux Driver Please refer to readme.txt that is included in the driver file for detailed instruction.
Power Input Specifications The UPort 2210 and UPort 2410 both support 5 VDC bus power.