User`s manual

V481 WinCE User’s Manual Getting Started
To delete a routing item,
\> route DELETE 192.168.0.0
Simple Network Management Protocol (SNMP)
SNMP is the standard Internet protocol for network management, and is one part of the TCP/IP
protocol suite. SNMP was developed to monitor and manage networks. It uses a distributed
architecture that consists of agents and managers:
SNMP agent
The SNMP agent is an SNMP application that monitors network traffic and responds to queries
from SNMP manager applications. The agent also notifies the manager, by sending a trap, when
significant events occur.
SNMP Manager
An SNMP manager is an SNMP application that generates queries to SNMP-agent applications
and receives traps from SNMP-agent applications.
The V481 computer installs an SNMP agent to serve as an SNMP device. You should install the
SNMP manager on the workstation computer (for example, a Linux system) that monitors the
network. After installing the nodes, you need to configure the SNMP manager and agent.
To check SNMP agent capabilities in a target V481 computer (e.g., if the network IP address is
192.168.3.127), log on to the workstation computer (for example, a Linux-based computer) on
which the SNMP manager resides, and then type:
\> snmpwalk -v 2c -c public 192.168.3.127 system
SNMPv2-MIB::sysDescr.0 Microsoft Windows CE Version 5.0 (Build 1400)
SNMPv2-MIB::sysObjectID.0 SNMPv2-SMI::enterprises.8691.13.7420
SNMPv2-MIB::sysUpTime.0 1282929
SNMPv2-MIB::sysContact.0 Your System Contact Here
SNMPv2-MIB::sysName.0 WindowsCE
You will see a series of messages from the SNMP agent on the V481 computer. From there, you
can monitor and manage the computer.
Inserting a USB Mass Storage Device into the Computer
Inserting a USB mass storage device will generate a new drive on the V481. The new drive should
be visible in the File Explorer.
Inserting a Compact Flash Card Storage into a V481
Computer
There is a second CompactFlash slot inside the V481 computer. The Compact Flash slot is
designed as a secondary IDE device and it does not support Plug and Play or hot swapping. If you
plug a CF card into the slot when entering the operating system, it will make the system hang.
As a result, you must turn off the power before inserting a Compact Flash card. After the CF card
is inserted, you can power on the V481. The new folder should be visible in the File Explorer.
2-9