Datasheet

1
www.moxa.com
[e-mail]
Remote Monitoring Solutions
Rugged 1-channel MPEG4 industrial video server (encoder)
VPort 3310 Series
Introduction
The VPort 3310 is a 1-channel industrial video server (encoder)
that uses the standard MPEG4 algorithm, and features DIN-Rail
mounting capability, 24 VDC redundant power inputs, and IP30
protection to meet the requirements of inustrial environments. A
cutting edge MPEG4 algorithm gives the VPort 3310 an FPS of up
Industrial design with -40 to 75°C operating temperature ›
Compress analog video/audio signals in MPEG4 video stream ›
Multicast (IGMP) for transmission efficiency ›
Video stream up to 30 frames/sec at CIF (352 x 240) resolution ›
Free VPort SDK and 4-channel video surveillance software ›
Specifications
NTSC PAL
Size Max. FPS Size Max. FPS
QCIF
176 x 120 30 176 x 144 25
CIF
352 x 240 30 352 x 288 25
VGA
640 x 480 10 640 x 576 8
4CIF
704 x 480 10 704 x 576 8
to 30 in CIF resolution (352 x 240), with maximum bandwidth of
1.6 Mbps, to provide high video performance and more efficient
network transmission. In addition, the VPort 3310 also supports audio
communication for a voice-over-IP solution, making the control of your
video surveillance system more real-time.
Video
Video Compression: MPEG4 (ISO/IEC 14496-2)
Video Inputs: 1, BNC connector (1.0 Vpp, 75 ohms)
Video Outputs: 1, loop-through BNC connector
NTSC/PAL: Auto-sensing or manual
Video Resolution and FPS (frames per second):
Video Viewing:
• Adjustable image size and quality
• B/W or color control
• Timestamp and text overlay
Audio
Audio Inputs: 1 Line-in or MIC-in with 3.5 mm phone jack
Network
Protocols: TCP, UDP, HTTP, SMTP, FTP, RTSP, RTP, RTCP, NTP,
DNS, DDNS, IGMPv3, SNMPv1/v2c/v3, DHCP, UPnP, PPPoE
Ethernet: 1 10/100BaseT(X) auto negotiating RJ45 port
Serial Port
COM Ports: 1, RS-232 (DB9 male connector) or RS-485 (terminal
block connector), max. speed of 115.2 Kbps
GPIO
Digital Inputs: 2, max. 8 mA
• High: +13 to +30V
• Low: -30 to +3V
Relay Outputs: 2, max. 24 VDC @ 1 A
LED Indicators
PWR1: Power 1
PWR2: Power 2
FAULT: Power failure
VIDEO: Video input
AUDIO: Audio input
SERIAL: COM port status
Power Requirements
Input Voltage: 2 24 VDC power inputs for redundancy
Power Consumption: Max. 7.5 W
Physical Characteristics
Housing: Metal, IP30 protection
Dimensions: 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in)
Weight: 790 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Alarms
Video Motion Detection: Includes sensitivity tuning
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Email/FTP Messaging: Automatic transfer of stored images via
email or FTP with event-triggered actions