User`s manual
Table Of Contents
- 1. Overview
- 2. VPort Set/Get Configuration CGI URL and Parameter Items
- VPort Set/Get Configuration CGI URL and Parameter items
- VPort 351 and VPort 251 serial and PTZ control configuration
- VPort 451/461/254/354/364/364A/VPM7304 serial and PTZ control configuration
- MJPEG Mode Media Stream CGI URL
- Audio Output CGI URL
- PTZ Control of CGI URL Command Sets and Parameters
- DynaStream Control CGI URL
- Get Snapshot CGI URL
- Remove PTZ Driver CGI URL
- Device Reboot CGI URL
- Get I/O Status CGI URL
- System Information CGI URL
![](/manual/moxa/vport-p06-1mp-m12-cam42-t/user-s-manual-english/images/img-33.png)
VPort CGI Commands VPort Set/Get Configuration CGI URL and Parameter Items
2-29
1: data transmit
VIDEO 0: no video signal
1: video signal detected
Status of video signal
SD 0: no SD card inserted
1: SD card insert
Status of SD insertion
DI 0: non-active
1: active
DI1 to DI#
Note: Depends on the number of digital
inputs on the VPort.
DO 0: non-active
1: active
DO1 to DO#
Note: Depends on the
number of replay
outputs on the VPort.
System Information CGI URL
The system information CGI command is used to get VPort system information.
systeminfo.cgi
Example:
http://192.168.127.100/moxa-cgi/systeminfo.cgi
VPort Reply Parameters:
Information Item Value Description
Model String Model name
HostName Max 40 chars Server name
RTSPPort 1 to 65535 RTSP port number
CameraNumber 1 to N Camera number
UartNumber 0 to N Uart number
DINumber 0 to N DI number
DONumber 0 to N DO number
VideoCodec MP4V, MJPG, H264 Supported video codec type. ( MPEG4, MJPEG,
H264)
AudioCodec PCMU Supported audio codec type.
FirmwareVersion xx.yy.zz Firmware version
MotionDetectionMethod 3 Number of motion detection windows
StreamingSupport 1,[1,1,(1,3,2)] All supported codec type by VPort model
StreamingNowCodec 1,[1,1,(1,1)] Codec type for current configuration
MagicCode 00008001 To identified module type
Deinterlace 0 or 1 Build-in de-interlace processing
MACAddress xx:xx:xx:xx:xx Mac Address of device