User`s manual
Table Of Contents
- 1. Overview
- 2. VPort Set/Get Configuration CGI URL and Parameter Items
- VPort Set/Get Configuration CGI URL and Parameter items
- VPort 351 and VPort 251 serial and PTZ control configuration
- VPort 451/461/254/354/364/364A/VPM7304 serial and PTZ control configuration
- MJPEG Mode Media Stream CGI URL
- Audio Output CGI URL
- PTZ Control of CGI URL Command Sets and Parameters
- DynaStream Control CGI URL
- Get Snapshot CGI URL
- Remove PTZ Driver CGI URL
- Device Reboot CGI URL
- Get I/O Status CGI URL
- System Information CGI URL
VPort CGI Commands VPort Set/Get Configuration CGI URL and Parameter Items
2-4
network
Item Action Value Description
networktype G/S 1: Get IP address automatically
2: Use fixed IP address
3: DHCP with Auto configure
Method used to get the IP address
•
Auto configure is based on DHCP
option 66/67
• Auto configure
ipaddress G/S xxx.yyy.zzz.www IP address
subnet G/S xxx.yyy.zzz.www Subnet mask
router G/S xxx.yyy.zzz.www Router IP address
dns01 G/S xxx.yyy.zzz.www First DNS IP address
dns02 G/S xxx.yyy.zzz.www Second DNS IP address
http
Item Action Value Description
httpport G/S 1 to 65535 HTTP server port number
Default value is 80
httpsport G/S 1 to 65535 HTTPs port number.
Default value is 443
httpmode G/S 1: http only
2: http+https
Enable/disable https
Default is http only.
telnet
Item Action Value Description
enable G/S 0 or 1 Enable/disable telnet
smtp
Item Action Value Description
serverip01,
serverip02
G/S Max 40 char (HostAddressString) First and second SMTP IP or URL
username01,
username02
G/S Max 16 char (UsernameString) Username of first and second SMTP
server
password01,
password02
G/S Max 16 char (PasswordString) Password of first and second SMTP
server
returnemail01,
returnemail02
G/S Max 80 char (MailAddressString) Sender’s email address of first and
second SMTP server
mailto01, mailto02 G/S Max 80 char (MailAddressString) First and second recipient’s email
address