User's Manual Part 1

NPort W2004 User’s Manual Web Console Configuration
5-20
Port 1/2/3/4
Port alias
Setting Factory Default Necessity
1 to 15 characters
(e.g., PLC-No. 1)
None Optional
“Port alias” is included to allow easy identification of the serial devices that are connected to
NPort W2004’s serial port.
Serial Parameters
ATTENTION
Check the serial communication parameters in your Serial Device’s user’s manual. You should
set up NPort W2004’s serial parameters with the same communication parameters used by your
serial devices.
Baud Rate
Setting Factory Default Necessity
50 bps to 460.8 Kbps 115.2 Kbps Required