User's Manual Part 2

NPort W2004 User’s Manual Installing and Configuring the Software
6-11
4. Alternatively, you can select Input Manually and then input the NPort IP Address, 1
st
Data
Port, 1
st
Command Port, and Tota l Ports for the NPort W2004 that you would like to map
COM ports to. Click on OK to proceed to the next step.
5. Click on Ye s to activate the COM ports at this time, or click on No to activate the COM ports
later. Activating the COM ports saves the information in the host system registry. The host
computer will not have the ability to use the COM port until you click on the Apply icon.