User Manual

Type Color Meaning
Red Steady On: Power is on and NPort is booting up.
Blinking: Indicates an LAN IP conflict, or DHCP or
BOOTP server did not respond properly.
Green Steady On: Power is on and NPort is functioning
normally.
Blinking: The device server has been located by
Administrator’s Location function.
Ready
Off Power is off, or power error condition exists.
WLAN Green On: Wireless Enable
Blinking: Indicates an WLAN IP conflict, or DHCP or
BOOTP server did not respond properly
Yellow 10M Ethernet connection.
Green 100M Ethernet connection.
10/100M Ethernet
Off Ethernet cable is disconnected, or has a short.
Yellow Serial port is receiving data.
Green Serial port is transmitting data.
P1, P2(W2250)
Off No data is being transmitted or received through the
serial port.
Signal Strength Green Five LEDs represent WLAN signal strength of
20%~100%, in 20% scale. When WLAN link to the
access point, the last LED is on